Cernit Motor for Pasta Machine

The Marcato motor for pasta machines has multiples advantages :

- It frees the hand which usually has to turn the crank and eases, for example, the creation of skiner blendswhich have to be elongated step by step.

- It is mandatory when one suffers chronicle pains (such as tendinitis, osteoarthritis etc.) and relieve hands and arms.

- It is easy to install and remove if you have to carry your tools.

The motor for the pasta machine will allow you to create with your hands free!

Appreciated by professionals, the motor will delight creators.

The motor is designed for your Cernit, Marcato and Atlas machines.

Precautions for use:

As a general rule, do not pass any sheet whith a thickness greater than 2 times the roll gap.

Do not try to pass too thick clay sheets in your machine (for example a whole block) It would cause a stress and a too important spacing of the rollers and the thickness of your sheets of clay would no longer correspond to the settings. In addition, you could damage the mechanisms, which is not covered by the warranty.

When you want to refine a sheet to the thinnest setting, gradually go through all the settings to avoid forcing on the rollers.

If the rollers crack, lubricate the gears with vegetable oil or petroleum jelly.

Clean your machine with a cloth or a baby wipe cloth, do not wash it with water, do not put in the dishwasher.

Contains small parts, risk of suffocation. Use by a child only under the supervision of an adult.

The machine can be disassembled to clean the scrapers.

If used for polymer clay your machine must be used for alimentary purpose.

The motor for Cernit pasta machine (Marcato) comes with a 2-years legal warranty.