My Cart
Makin's Professional ClayCore Extruder Adapters, 3 pcs., Set B (3.5/4/4.5 mm)

Makin's Professional ClayCore Extruder Adapters, 3 pcs., Set B (3.5/4/4.5 mm)

Makin's Professional ClayCore Extruder Adapters, 3 pcs., Set B (3.5/4/4.5 mm)

  • Weight: 150g
  • Availability: 2
  • 10.62€

Barcode: 656290350976

SKU: 5001020010110


Makin's Professional ClayCore Extruder Adapters, 3 pcs., Set B (3.5/4/4.5 mm)

Extruding is a design technique in which a deformable material (clay) is forced through a die.

Extruding is a continuous or discontinuous process.

The mold contains at least one, more or less complex-formed hole that gives the finished material, the extruding profile, its shape.

See the product photo for content and other information.

TIPS: Always soften hard clays with your hands before putting into the barrel

To use the clay extruder:

  • Select the disc design that you want to use. Place the disc in the end of the barrel extruder.
  • Knead a small amount of clay in your hands to warm and soften the clay before extruding.
  • Roll clay into an oblong shape and insert it into the barrel of the extruder from the bottom.
  • If necessary use a small stiff bottle washer to help clean the clay out of the barrel.

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: Makin's, Makin's tools, clay tools, Makin's clay tool, Clay extruder discs