INSTRUCTIONS FOR USE

Monster Clay, one of the most famous brands in the world, is a sculptural polymer mass (plasticine) that can be melted and poured into a silicone mold and then finalize. Great for the smallest details. Neutral to silicones. It can be melted and then returned to its original state.

Monster Clay has an ultra-smooth texture with a low melting point and low grip so it won't stick to tools.

Another unique feature of Monster Clay is its high elasticity. It gives the clay an unusual ability to stretch, when heated, and allows it to create unusual shapes that would be difficult to obtain in any other way.

Monster Clay melts at 57 °C (134 °F). The optimum temperature for melting and pouring is approximately 65 °C (149 °F). Do not exceed 107 °C (225 °F). Slightly melting to a fluid consistency.

Attention! When melting, it is recommended to stir the mass, and stir thoroughly before pouring. Do not melt in the microwave, only in the oven or thermobain.

Monster Clay can be re-melted and returned to its original state by refrigerating it. It can be reused indefinitely without any composition changes. Monster Clay is ideal for fast playability as well as fast prototype duplication when details need to be added.

Monster Clay stays firm at room temperature, allowing precise sculpting with fine sculpting tools. Non-Curing / Non-Oxidizing Formula - Unlike many clays, Monster Clay does not brittle, dry or lose its plasticity over time.

CAUTION!

For children from 8 years of age. Adult supervision is required.

WARNING!

Read the operating instructions before starting work, keep them in mind.

Information for first aid

In case of accidental overheating and inhalation of toxic gases, remove victim to fresh air and seek medical advice, emergency medical care. In case of doubt, seek immediate medical attention with the material and/or packaging. In case of injury, always seek medical attention.

Advice for adults or teachers

Read and follow the instructions for use, safety, and first aid recommendations, keep them for future reference.

Security regulations for EU countries

Keep younger children and animals away from work with polymeric materials. Store chemicals and accessories out of the reach of children. Wash hands after use, clean all shaping accessories. Do not use accessories that are not included or are not recommended for use. Do not eat, drink, or smoke in the area where working with polymeric materials. Do not put materials or accessories in your mouth. Do not exceed the heating temperature above 130 ° C to avoid the formation of dangerous gases. The heating process should only take place under the strict supervision of adults. Use a thermometer suitable for the oven, such as metal. Do not use a glass thermometer. Do not heat in the microwave.

Waste management

The material can be disposed of in the normal way with household waste.