Liquid glass drops is water-based contour-adhesive. Odorless, non-toxic.

It is used to create the "glass drops" effect on any surface (paper, cardboard, cloth, wood, ceramics, glass, plaster, candles).

Apply using the built-in dispenser. After drying drops retain their volume.

Time of complete drying of 8-10 hours.

Warning: do not use a hairdryer to dry - drops lose their shape and shine!

Slight loss of pigment to the bottom of the bottle is allowed.

Shake the bottle vigorously several times before use to mix the contents.

Thickening of the contents is allowed due to a long break between single uses.

You can mix the thickened mass with distilled water in a ratio of 1:20 to the content.

Complete drying of the contents over time after opening the bottle is not a complaint case.

After each use, wipe the dispenser spout with a damp cloth and close the container tightly to prevent drying out.

Store, carry and use at temperatures above 5°C.

Not intended for eating or food decoration.

Warning: do not use a hairdryer to dry - drops lose their shape and shine!

Please note: we are not able to ship this product when outside temperature is below 0°C.

Produced by Fabrika DecoruTM, Ukraine.