UV RESIN - CREATION

UV-Creation Transparent Resin - Create NON-STOP! It is a resin that cures UV in 2-5 minutes.

Instructions:

• Prepare a work surface using a plastic sheet, plastic film, a piece of tape or a "film" of normal polyethylene.
• Draw your model with a marker.
• Squeezing with the same constant force, press the resin of the tube following the desired pattern.
• Hold the UV torch at a distance of 1 to 2 cm from the product for 2 to 5 minutes, directing the UV rays to the created part. If your creation is more than 5 mm thick, it is necessary to reach the desired thickness by creating different layers. Each layer should be thoroughly dried before moving on to the next.
• If the product remains slightly sticky, it is necessary to continue exposure to UV rays or to leave it exposed to light in a dry and hot place for several hours before it dries completely.

Look for tips on how to use UV RESIN on YouTube channel